Which Parts Of An HVAC System Can You Replace On Your Own?

HVAC systems can be complex, but the parts that make them work are relatively simple. In this post, we’ll break down the different components of an HVAC system and discuss which ones you can replace on your own.

A Furnace’s Blower Motor

If you have a furnace with a blower motor, it’s important to replace it if it starts making noise or stops working. The blower motor is the part of your HVAC parts system that pushes air through the ductwork and into your home.

When replacing an old blower motor with a new one–or even just cleaning off dust buildup around its blades–make sure it matches up exactly with what was originally installed by measuring both dimensions (height x width x depth) before purchase; most modern models should fit well enough without needing adjustment after installation as long as everything else stays put during operation hours!

An Air Conditioner’s Condenser

The condenser is the parts of an air conditioner that cools the refrigerant. It’s located outside of your home and can be accessed through a panel on the side of your house or garage, depending on where you live. The condenser needs to be cleaned periodically because dust and dirt buildup can cause problems with its operation and lead to higher energy bills. If you’re comfortable working with tools, then cleaning this part yourself may save some money over hiring someone else to do it for you!

An Air Conditioner’s Compressor

The compressor is the central component of an HVAC parts system. It’s what pumps refrigerant through your home and into coils, where it changes from a liquid to a gas and absorbs heat from your house. The more efficient your compressor is at doing this, the less electricity you’ll use and the more money you’ll save on utility bills.

Compressors are also large–usually about five feet long by two feet wide–and heavy; they weigh between 75 pounds and 200 pounds depending on how many tons (or BTUs) of cooling capacity they provide for your home.

A Heat Pump Outdoor Fan Motor

The heat pump outdoor fan motor is responsible for moving air through the heat pump’s coils. If it’s broken, you will need to replace it with another standard size motor found at any hardware store.


With all of these parts, you can see that there’s plenty of opportunity to save money by doing your own HVAC repairs. With the right tools and knowledge, you can save yourself hundreds or even thousands on heating and cooling costs each year!

How To Save Money On Plumbing Supplies: Shopping Online

If you work on a home improvement project, the cost of your supplies can add up quickly. Luckily, there are plenty of ways to save money on plumbing:

Reuse Old Parts

If you have an old faucet, toilet or drain that’s leaking, consider using the parts from that to repair a newer model. The same goes for pipes and shower heads: If you’re replacing one of these items because it’s leaking, take a look at the old ones first–and then purchase new ones only if necessary.

Buying In Bulk

Bulk shopping allows you to purchase products at lower prices per unit than if they were purchased individually. This is because many stores offer discounts when customers buy more than one item at once–for example, if two tubs of toothpaste cost $4 each but buying three tubs would only cost $3 each (a total savings of $1).

In addition, some retailers offer free shipping when orders reach certain thresholds–so if all your items qualify for free shipping and add up to over that amount anyway (or close enough), then all those extra items won’t cost anything extra!

Shopping Around

There are a few ways to save money on plumbing supplies. The first is by shopping around for the best prices, which can be done both online and in person at your local hardware store or home improvement center. You may find that one place has a better deal than another, so it’s worth checking out both options before making your final decision about where to purchase your items.

Use Coupons And Discount Codes

One of the easiest ways to save money on plumbing supplies is by using coupons and discount codes. These can be found online, in newspapers and mailings, at your local hardware store or home improvement store. You can also print out coupons from websites or see if there are any offers on certain brands.

If you do not want to spend time searching for these types of deals yourself then consider signing up for email lists from different companies so that they can send promotional material directly to your inbox every week or two months (or whatever frequency works best for you).


If you’re looking to save some money, there are many ways to do it. From shopping around and using coupons and discount codes, to buying in bulk and using these tips, we hope that this article has been helpful!

How Long Should An HVAC Circulator Pump Last?

Have you ever wondered how long an HVAC pump should last? The short answer is: it depends. The long answer is: it depends on the following factors.

The Proper Piping Of The Pump

The proper piping of the pump is very important, because it will determine how long your HVAC pump will last. The piping should be made from stainless steel or copper, as these metals are resistant to corrosion.

You also want to make sure that your piping is connected in a way that avoids any unnecessary bends or kinks, which can cause friction and wear on the pump. If you notice any leaks coming from your piping, you may need to replace it sooner than later.

How Often You Use The System

If you only use your HVAC system once a day for a few hours, then the circulator pump will likely last longer than if you run it every day for 8 hours. It’s important to keep in mind that if you run your air conditioning system less than once per week, then there may be a build-up of mineral deposits in your system that can shorten the life of your pump.

How Much Water Is Being Circulated

The amount of water being circulated through your system can also play a role in determining how long to expect your circulator pump to last. If you live in a humid environment where there are high levels of moisture in the air and little use of air conditioning, then this could lead to premature failure due to corrosion from salt build-up.

Motor Speed And Voltage

The first factor that affects the life of your pump is its motor speed and voltage. If you have a high-voltage, high-speed pump, then it will last longer than a low-voltage, low-speed one because it has more power and can be run for longer periods of time without overheating.

The second factor that affects the life of your pump is whether or not it has an overload protector installed in it. This protects against overloading your pump, which could damage its internal components and shorten its lifespan significantly.

How Well It Was Installed And Maintained

The quality of the materials used in the installation will have a significant impact on its longevity, as well as the ease with which repairs can be made. Poorly installed pumps will require more frequent maintenance and repairs, while a well-installed pump will only need routine maintenance to ensure it continues to operate at peak efficiency.

Is It Smart To Buy Electrical Supplies Over The Internet

When it comes to buying supplies, many people wonder if purchasing them over the internet is a smart decision. In this blog, we will discuss the advantages of buying online, and help you make an informed decision.


One of the biggest advantages of purchasing your electrical supplies online is convenience. With the click of a button, you can order any item at any time of day or night and have it shipped directly to your home or office.

This means that you don’t have to waste time driving around town looking for what you need or having to deal with crowded stores where employees aren’t always helpful. It also means that there’s no need to worry about running out of an important product because it was ordered too late in the day or on a weekend when most stores are closed.


Another reason why buying online is such a smart choice is because it can save you money in many cases. While some products like fuses and circuit breakers may be cheaper at hardware stores than on websites like Amazon or eBay, many other items like switches and receptacles are generally much less expensive when purchased through these sites than they would be if they were purchased locally.”

Wide Selection

When you buy online, you have access to a wide selection of products and can easily compare prices. By comparison shopping for your electrical supplies online, you can ensure that you are getting the best deal possible on all of the products that you need. You can also find specialty products that may not be available in local stores.

Ordering online also allows you to avoid having to travel around town looking for what you need. When it comes to electrical work such as installing new outlets or switches, having to go from store-to-store searching for what you need can take up valuable time that could be better spent actually doing the work itself!

Read Reviews

Another advantage of buying online is that you can read reviews from other customers before making your purchase. These reviews are very helpful because they allow for transparency in terms of quality and performance of each product. You can find out what other people think about the item before purchasing it yourself; this will help prevent any unpleasant surprises down the road!

How Do Smoke And Fire Dampers Work In Ductwork?

Have you ever seen a fire in a wood stove? Most likely yes. If your house has an attic, chances are very, very good that hot air rises up there. What happens when hot air rises? It wants to find another way out than the small holes of the flues. If you’re burning a woodstove or something similar, it can lead to smoke entering your home. This is why many people use a smoke and fire damper for their ductwork. In this article we want to explain the purpose of smoke and flame dampers.

Stop Flames From Spreading From One Compartment To Another

When a fire occurs in a building, it’s important that the fire be contained so that it doesn’t spread and take out more than just the space where the fire started. Smoke and flame dampers help to ensure that this happens.

Flame dampers are designed to open automatically when a fire starts, allowing smoke and heat to escape while keeping flames from spreading into other areas. They’re usually located between floors or on walls, so they can be easily accessed in case of emergencies.

Allows For Larger Amounts Of Smoke And Heat To Escape

Smoke and fire dampers are a critical part of your ductwork safety. They allow for larger amounts of smoke and heat to escape without letting flames into the ductwork, which would cause extensive damage to your home.

The damper is installed at the top of your ductwork where it meets the wall. It’s designed to close automatically when there’s a fire, which prevents smoke from entering your home while still allowing some heat to escape so that firefighters can do their job.

Designed To Close Off An Air Duct In The Case Of A Fire

Smoke and fire dampers, or SFDs, are designed to close off an air duct in the case of a fire, so the fire doesn’t spread. The damper is a rectangular metal panel with a small handle on the side. When you pull out the handle, it opens a panel that lets smoke and hot gases pass through. When there’s no fire, you can push it back in to seal up the ductwork.


These are used in systems that are completely surrounded by other combustible materials. Wood burning stoves and furnaces are examples of these types of systems. These types of dampers are special because they prevent over pressurization which can cause the system to tear itself apart. Indeed, if you notice an increase in smoke getting into your house, it is a good sign that your damper needs service.